Surpass Hobby F540 V2 sensorless motor + 60A ESC waterproof 3300KV  with LED Program Card 

RM159.00

Surpass Hobby F540 V2 sensorless motor + 60A ESC waterproof 3300KV  with LED Program Card 

60 in stock

SKU: SP-254033-05 Category:

Surpass Hobby F540 V2 sensorless motor + 60A ESC waterproof 3300KV  with LED Program Card 

*Description:
Item Brand:Surpass Hobby
Item Number:F540 V2(F540/9T, F540/12T)+60A
Item Name:RC car motor +esc set
Material:Metal and plastic
Color:Black
The Size of the Motor:Length 50mm,diameter 36mm,shaft diameter is 3.175mm,length of extended shaft is 15mm
The Size of the ESC:51.5*38.5*38.5mm
The Weight of the Motor/ESC:About 125g/76g
Recommendating Program Card:product id:1057127
Fit For:1/10 brushless rc cars

 

*The Specification of the Motor:
KV:3300KV
Watts:800
Max Voltage:<12V/<17V
Max Amps:66A/47A
Rotor Poles:4
IO:3.2A/1.9A
Resistance:0.0185/0.0285
Max RPM:50000
Connector:4.0mm gold
 

*The Specification of the ESC:
Cont.Current:60A
Burst Current:360A
Motor Type:Sensorless Brushless Motor
For 6s Lipo or 6 cells NiMH
1.On-road 3660-size or smaller motor with the kv <4300
2.Off-road/buggy/monster 3660-size or smaller motor with the kv <3300
For 3s lipo or 9 cells NiMH
1.On-road 3660-size or smaller motor with the kv <3300
2.Off-road/buggy/monster 3660-size or smaller motor with the kv <2600
Suitable Car:1/10 car
Resistance:0.0007ohm
Battery:2-3 cells lipo/4-9 cells NiMH
BEC Output:5.8V3A(switch model

Item SKU : SP-254033-05

 

*Program Card:
KS-100010-01
Surpass Hobby Rocket RC 
LED Program Card Black
61mm x 48mm x6mm 
 

*Specifications:

This program box is used to program the brushless ESC.
Electronic speed controller programmer is used to control braking force.
Suitable esc: 25A, 35A, 45A, 60A, 80A, 120A ESC.
Used with: 1/8,1/10,1/12,1/14,1/16,1/18 rc car.
Size: 80x60x6mm (2.4 x 1.9 x 0.2inch).
Weight: 26g (0.92oz).

Function
1. Low voltage detection is 3.1V, 2.9V, 2.7V, no detection.(default 3.1V).
2. The start mode is normal, soft, and strengthened (default normal).
3. The maximum braking force (25A, 45A, 60A) is 50%, 25%, 75%, 100% (default 50%).
(80A, 120A) 25%, 50%, 75%, 100% (default 25%).
4. The maximum reversing force is 25%, 50%, 75%, 100% (default 25%).
5. The width of the center point is 9%, 6%, 12% in sequence (default 9%).
6. BEC cable connection is connected according to the color direction.

Programme card operation method:

1. Connect BEC wires with the program car then turn on the ESC (Note: 80A,120A should be press the keys to be not put).
2. The Green LED flashes for 2 times then LED off, that is, the connecting program car with ESC is successful,
and the White LED on presents the current value of that item. Otherwise, the connecting is failed.
3. Press the Key "↓" to select different programs.
4. Press the Key "→" to select different value of the current program.
5. Press the Key "Program" to confirm above selections, the Green LED on immediately and has gone out
within 5 seconds, that is, this process is successful. Otherwise, programming fails.
6. Press the Key "Reset" to reset the factory setting. (reprogram after turning off the power).
 

Weight 0.40 kg
Dimensions 25.00 × 25.00 × 20.00 cm